×
604.514.1322 Email Us
Services Projects Before & After Reviews Videos News & Events About Us Contact Us Française

Videos


showing 13 to 18 of 26 on page 3
    1  2  3  4  5    

Industrial building foundation construction project for EWOS Canada enters new phase

Here is a cool short video from our recent commercial structure concrete foundation construction project in Surrey. We’ve just poured a 5 trucks total of concrete (42 cubic meters) to fill this forming work we’ve spent several weeks constructing. This 100' x 78' industrial building foundation is designed to support a 10’ prefab steel building. One thing that makes this project super cool is that we had to be super precise in our forming because the engineering requirements of this structure’s anchor bolt design layout have only 1cm variance, meaning all 64 anchor bolts we are installing can only be off by 1 cm each! In order to comply with this contractual specification, we fabricated custom anchor plates for each of its 12 pilasters. We didn’t stop there. We even enlisted a third-party surveyor to survey and confirm the exact center of all plates to be 100% sure of anchor bolt locations. Oh, by the way, an average 2-story house foundation requires approximately 1/2 as much concrete (20-ish cubic meters), so it was like pouring 2 house foundations all at once.

Moore & Sons pours a record amount of concrete, enough to cover 10 NHL ice rinks in 2023

Did you know Moore & Sons poured approximately 165,000 square feet of concrete in 2023? That's enough concrete to cover the entire floor area of BC Place or equivalent to covering over 10 NHL-sized ice rinks! WOW! That’s A LOT of concrete poured in 2023! Book your free estimate now. We are booking up fast!

Ashlar pattern paving stone / paver driveway construction in Langley

Moore & Sons just completed this amazing 2500 sq ft paver driveway in Brookswood, south Langley. The pattern is called Ashlar and the driveway has a double charcoal border with shadow coloured infill.

Exposed Aggregate Driveway Construction with Trench Drain

Our customer in Surrey explains his experience with Moore and Sons after we removed their 32 years old sunken and cracked exposed aggregate driveway and rebuilt it with new exposed aggregate driveway and trench drain.

Moore & Sons builds Zamboni bays at hockey arena in Langley

Moore & Sons was hired to replace both Zamboni bays at Langley Sportsplex that were pitted and rough from wear of the studded winter tires on the Zambonis since its opening in 1999. We removed original concrete flooring of east and west Zamboni bays and rebuilt new reinforced concrete slabs. At the east wing of the Sportsplex we also cut concrete flooring to install pre-sloped 4" trench drain and catch basin for ice melt water diversion. It was a small job but we couldn’t pass on the wonderful opportunity of building something that is very Canadian!

What is paving stone delamination and why does it happen?

Quite often we see paving stones that are badly delaminated like this driveway we recently replaced. Bricks delamination occur when the bricks surface chip, frail, crack and dislodge prematurely from normal wear and tear of every day driving and walking on them.

Usually these bricks are factory rejects and should never be used. Unfortunately, some contractors install them as a cost effective way to increase their margin. When you consider hiring a paving stone contractor, make sure you ask what type of pavers they would be installing. If it is factory seconds or rejects, avoid using them no matter how low cost it may sound.

Cheap bricks don't last and replacing them within 5 - 10 years will cost you more than the savings you wanted to see in the first place. At first, you may not be able to tell bricks' quality so it is important to learn about the stones and bricks your contractor will be using before your project begins.

showing 13 to 18 of 26 on page 3
    1  2  3  4  5